We’ve had a problem over the past week where mail will just stop being routed and will accumulate in mail.box. The router task itself seems to be running, and we’ll see inbound SMTP connections being made but no routing of the message. In fact, no messages are being routed at all, whether inbound or outgoing, internal or external.
Rebooting the server seems to do the trick for a while, but the problem always resurfaces. I’ve let the server recreate a new mail.box everytime, but that doesn’t help, so I think I’ve ruled that out. We usually take the mail that had been accumulating in the old mail.box and copy it into the new one (while it’s working) so it can at least route it out.
I turned on activity logging and changed server logging to verbose, because I don’t see anything in the normal log.nsf views that indicates an error. Last week I saw something by chance when I was watching the server console about a corrupt dbdirman.nsf but we let that recreate as well to no avail. The next time it happens, maybe I’ll see something in the logs.
We’re running NetShield on the box, which we just disabled on the volume that Notes runs on – we’ll see how that works. We also run SAV 4.1, but obviously I can’t disable that. I did turn off the uselss anti-spam, though (no point if you’re not running the premium version).
Also, I don’t see any relevant error msgs on the OS Event Viewer.
Any ideas?
Subject: Router just stops
I have seen this exact problem and it was caused by a failing DNS server. The router would run fine for a while, then it seemed to open to many connections to the DNS box and stop routing (or slow way way down). We noticed that sometimes it would send off a small batch of messages every 20 min or so.
When this happens use the “Tell router show que” command to give you more insight on what is happening with the router.
Greg
http://www.mimeshield.com
Subject: RE: Router just stops
It happened again when we got in this morning, but “tell router show que” didn’t really give us any insight. I pored over the verbose logs but didn’t find much there, either. I disabled the compact, fixup and updall tasks that usually run overnight and will see if that helps.
I don’t think there are any DNS issues – I’ve checked that out as well. Also, restarting the Domino service was all it took to get it going again – rebooting the server wasn’t necessary, so I think this is more of a Domino issue. The other day it was happening during the daytime, but mostly we find it in this state when we arrive in the morning.
Subject: RE: Router just stops
Sorry to hear it. What did the router que tell you? Did the router show any unusual message when you do a “show tasks”?
Greg
Subject: Router just stops
what is… SAV 4.1 ?
Subject: RE: Router just stops
Symantec Antivirus
Subject: ahhhh… we use GroupShield. Thanks
Subject: same issue…
I have the exacly same issue.My Domino server is running symantec 4.1 too.
It’s not a DNS problem, cause if i check all messages (when you go to the mail.box database) and select “release all dead messages to originally intended recipients”, it routes the messages, but the newer ones keep unrouted.
I’m still searching at symantec knowledge database…